The use of safe high strength bending tempered glass
Tempered glass is a type of safety glass. It is a prestressed glass made of ordinary plate glass after reprocessing. In order to improve the strength of glass, chemical or physical methods are usually used to form compressive stress on the surface of the glass. When the glass bears external forces, the surface stress is first offset, thus improving the bearing capacity and enhancing the glass's resistance to wind pressure, cold and heat, impact, etc. Tempered glass relative to ordinary plate glass, tempered glass is not easy to break, even broken will be broken in the form of particles without acute Angle, greatly reducing the harm to the human body.
The two core selling points of tempered glass:
The first is the strength of several times than ordinary glass, bending resistance.
The second is the use of safety, the increase of its carrying capacity has improved the fragile quality, even if the tempered glass damage is also small pieces without acute Angle, the harm to the human body is greatly reduced. Compared with ordinary glass, tempered glass has 3~5 times of rapid cooling and rapid heating properties, generally can withstand temperature difference of more than 250 degrees, to prevent thermal cracking has obvious effect. It's one of the safety glasses. To guarantee the safety of high-rise buildings to provide qualified materials.
Application range with the type of products and processing technology constantly updated, Through the composite processing of other glass, there are tempered laminated glass, tempered insulating glass, tempered Low-e glass, hot-dip tempered glass, etc., which makes the application range of tempered glass now become more and more extensive. Usually toughened glass can be used in the following industries:
1, Construction, building formwork, decoration industry (example: Doors, Windows, curtain walls, interior decoration, etc.)
2, furniture manufacturing industry (glass tea table, furniture supporting, etc.)
3, home appliance manufacturing industry (TV, oven, air conditioning, refrigerator and other products)
4, electronic, instrument industry (mobile phone, MP3, MP4, clocks and other digital products)
5, automobile manufacturing industry (automobile windshield, etc.)
6, daily products industry (glass chopping board, etc.)
7, special industry (military glass)
Precautions are as follows:
Packing Products should be packed in containers or wooden cases. Each piece of glass shall be packed in a plastic bag or paper, and the space between the glass and the packing box shall be filled with light soft materials that are not likely to cause appearance defects such as scratches on the glass. The specific requirements shall conform to the relevant national standards. Packing marks The packing marks shall conform to the provisions of the relevant national standards. Each packing case shall be marked with the words "face up, handle gently, be careful of breakage, glass thickness, grade, factory name or trademark".
All types of transport vehicles and handling rules used for product transportation shall comply with relevant state regulations. During transportation, the wooden box shall not be placed flat or slanted, and the direction of length shall be the same as the direction of transport vehicle movement. There shall be measures such as rain prevention. Storage products should be stored vertically in a dry room.
The company's products have passed China compulsory quality system CCC certification, Australia AS/NS2208:1996 certification, and Australia AS/NS4666:2012 certification. In addition to meet the national production standards, but also meet the overseas market quality requirements.